IPSEC
To configure IPSEC VPN connection:
- Go to Security / Encryption, check on the Activation checkbox and click Apply.
- Go to Connections and click Add button.
- Set the mandatory parameters:
- Name: set the name of connection.
- Type: select the type of connection.
- Authentication type: check the authentication type.
- Authentication method: check the required method in case of selecting PSK set the Pre-Phased-Key.
- Local ID: set ID local.
- Ip local: select a ip that you want to use.
- remote ip: select a remote ip to establish the connection.
When connecting to iphone or ipad the local id must be a FDQN
Advanced supported parameters:
| Encryption | AES or 3DES |
|---|---|
| Authentication | MD5 or SHA1 |
| Diffie-Hellman group | DH2 or DH5 |