Networking - General configuration

In the general configuration you can set host name for the server, the DNS server that the Comms Mundi will use internally. This page allows you also to define the values uses in the gateway motorization and dyndns parameters.

To set the configuration go to the page Networking → General and the following parameters:

• Host name: server1
• Domain name: commsmundi.com
• DNS servers: Primary: 127.0.0.1; Secondary: 80.58.61.250

to use the the value 127.0.0.1 as DNS server, you must enable the DNS server service in Comms Mundi. Otherwise use the DNS server from your ISP.