Networking - Routing

The page Networking → Routing , is the section is used to set the rules used to route networking traffic.

In order to add a default route where all the default traffic will go use the following parameters:

• Name:
• Priority: first
• Destination: x - default
• Gateways:
  • x - unique
  • IP address: 192.168.1.1; x - Auto-SNAT
• x - Activate external monitor
  • Method: ICMP; IP: 176.31.107.154

in external monitor is recommended to use more than one remote ip address.

Check the gateways defined in your system, at the page Networking → Routing [Gateways]. It's possible to define a DNS name for a default gateway.
In Comms Mundi there is two Dynamic DNS services that can be used:

• DDNS - use an account for Wireless Mundi dynamic DNS server.
• DynDns - use DynDns account.

Comms Mundi will periodically check for changes in the IP address and send an update command to the Dynamic DNS service selected.

Edit a default gateway and set a DDNS account use the following parameters:

• Hostame: server1.ddns.commsmundi.com
• Protocol: ddns
• Server: 176.31.107.154
• Username: demo
• Password: demo

Edit a default gateway and set a DynDns account use the following parameters:

• Hostame: server1.dyndns.org
• Protocol: DynDNS
• Username: demo
• Password: demo